Titanium rod has good physical and chemical properties, low density, light weight, non-magnetic, high strength, good corrosion resistance, which has good mechanical properties and weldability, Baoji Titanium rods are widely used in chemical equipment, water desalination, ship parts, electroplating industries, titanium is 10 times the general corrosion resistance of stainless steel, and titanium is the body's rejection of relatively low metal, so the medical titanium rod machining parts, widely used in human implants and medical devices with.
Technical requirements: 1, the chemical composition of titanium and titanium alloy bars shall comply with GB / T 3620.1, provisions, when the demand side reinspection, the chemical composition of the tolerances shall comply with the provisions of GB / T 3620.2 of.
2, thermal processing bar diameter or side length and tolerances shall comply with the provisions of one of the table.
3, after thermal processing by car (mill) light bar and cold-rolled, cold drawn rod diameter tolerances shall comply with the provisions of Table II.
4, after thermal processing by car (grinding) roundness light bars should be no greater than half the size of tolerance. 5, the processing state bar is not definite length of 300-6000mm, not length annealed state bar length 300-2000mm, length or double length should not length over the length of the